Mosaic tile JAB 47V541 sand beige

PRODUCT DESCRIPTION

The Mosaic tile JAB 47V541 sand beige brings a stone-look design to a glazed ceramic mosaic in sand and beige tones. It provides a warm, restrained colour direction while the smaller mosaic pieces add pattern to the surface. The stone-inspired appearance should be considered as part of the visual design: the specified material is ceramic, rather than a natural stone selected only on the basis of its colour or product name.

A sand-and-beige scheme can be developed around quieter adjacent surfaces or used to connect several warm neutral finishes. Consider how much of the wall or floor you want the mosaic to occupy. A smaller decorative section gives the repeated pattern a specific role, while a wider arrangement makes it more continuous. Comparing the mosaic with the surrounding materials helps establish the balance before installation begins.

SHEET SIZE & CERAMIC FINISH

The supplied dimensions are 29.7 × 29.7 cm for the complete sheet, with a thickness of 6.5 mm. The record describes a glazed surface and a frosted gloss level. These technical details help distinguish the product from a polished stone or an unglazed porcelain mosaic. Refer to the listed material and finish when discussing the intended look and fitting requirements with your installer.

The mosaic is net-glued on the back. Plan how adjoining sheets will line up across the whole area, including edges and any openings, so that the smaller pattern is considered beyond one isolated panel. A mesh-mounted format holds the arrangement together, but the installation still needs appropriate preparation and fixing materials. The relevant choices depend on the substrate and the conditions in which the surface will be used.

WHERE TO USE

The technical table lists wall and floor use, indoor and outdoor scope, and frost resistance. Living rooms, kitchens and bathrooms are named, and underfloor-heating suitability is recorded. These stated applications provide information for a project discussion rather than a replacement for it. Check the complete fixing system for an outdoor or heated installation, including transitions and any other details that need to be resolved around the tiled area.

Abrasion group 4 is listed and described as heavy use. Keep that classification available when checking the expected wear of a floor and avoid reducing the assessment to appearance alone. The warm stone-look design may suit the planned colour scheme, but the exact location, loading and installation requirements still need to be considered. Product-specific technical values are more useful than assuming all beige mosaics have the same performance.

BUYING & LAYOUT PLANNING

The current buying options are per sheet and per square metre. Confirm which unit is selected, then use this product's coverage information when calculating the quantity for the measured area. Note any narrow sections, corners or other interruptions that may affect cuts and the pattern arrangement. Consider an additional allowance in relation to the planned layout, rather than treating the measured surface and purchase quantity as necessarily identical.

Before ordering the Mosaic tile JAB 47V541 sand beige, compare the warm colour with the other finishes and review the mosaic scale in the context of the room. Discuss how the 6.5 mm surface will meet adjacent materials, and confirm a suitable installation approach. The separate specification table keeps the technical details available, while the description explains the particular combination of sand-and-beige colour, glazed ceramic construction and stone-look mosaic pattern.

SPECIFICATIONS