Mosaic tile square Crystal Uni CM 4050

PRODUCT DESCRIPTION

The Mosaic tile square Crystal Uni CM 4050 combines black glass with a glittering surface in a square mosaic arrangement. The dark colour can provide a strong contrast within a lighter scheme, while the smaller pieces introduce repeated detail at a different scale from a single large black tile. Its design depends on both the depth of the colour and the way the glass finish sits within the surrounding composition.

Consider how much of the surface should carry the black mosaic before deciding the layout. A concentrated feature can provide a clear accent, while a wider arrangement makes the dark finish more continuous. Compare it beside the materials already chosen for the room so that the colour contrast feels deliberate. The square pattern will remain part of the appearance, even when black is the main visual impression.

GLASS FORMAT & BACKING

The supplied specification lists glass as the material, a glittering gloss level and an overall format of 30.2 × 32.7 cm. Thickness is 4 mm. These dimensions describe the complete sheet, not the size of each individual square. The rectangular panel format is useful when considering how adjacent sheets will meet and where the pattern should start within the intended area.

The pieces are mesh-glued on the back, bringing the mosaic arrangement together as a sheet. Review joint alignment across panel boundaries, including corners and openings, rather than judging the design only from one isolated sheet. The 4 mm thickness is also relevant where the mosaic meets another tile or surface finish. Confirm appropriate preparation and fixing materials for the glass and the conditions of the installation.

WHERE TO USE

Wall and floor applications are listed, together with indoor and outdoor scope, frost resistance and swimming-pool suitability. Bathrooms, kitchens, living rooms and permanently wet areas are named in the source record. These stated applications give the installer specific information to assess, but the entire installation system still needs to suit the exact position and exposure rather than being chosen from the material or colour alone.

Abrasion group 1 is recorded as very light load. That limitation is particularly important if the product is proposed for a floor. The floor-use entry should not be expanded into a heavy-traffic claim or treated as evidence of an unlisted slip rating. Check the expected wear and any safety requirements before ordering for a demanding location, while retaining the distinction between the decorative appearance and the technical assessment.

BUYING & DESIGN PLANNING

The catalogue currently offers per-sheet and square-metre buying options. Check the selected unit before entering a quantity, and refer to the coverage information for this exact product when converting a measured area into an order. Include the perimeter, corners and any interruptions that will require cuts. Consider an additional allowance against the actual arrangement rather than assuming that another black glass mosaic will use the same rate.

Before purchasing the Mosaic tile square Crystal Uni CM 4050, compare the black glass and glittering appearance with adjoining finishes and agree the layout with your installer. Confirm the fitting system and how the thin 4 mm surface will meet surrounding materials. The separate specification table retains the measurements, classifications and stated uses, while the description explains the particular combination of dark colour, glass construction and square mosaic detail offered by the product.

SPECIFICATIONS